Gay Rights Essay -- essays research papers

Gay Rights Two men are walking down the street very peacefully until they decide to kiss one another right out in the open. Some people look upon this as weird and others look upon it in disgust. Some even get angry about it. Is there a problem with what these men just did? Should they be left alone or reprimanded for what they have done? The issue of gay rights is very cloudy in our great nation. Most of this is due to the problems with the issue, the reasons for controversy, and pros and cons of the issue. First of all, both sides have too many problems with gay rights for there to be a common ground on the issue. The biggest problem I find with the whole thing is the problem is not just fought by words, but also by physical means. There have been countless gay beatings across the United States. One instance took place on November 17, 2001. â€Å"Police said the 42-year-old Vancouver man, whose injuries indicate he was beaten several times with a baseball bat, might have been the victim of a hate crime† (HateWatch.org). Even though the number of hate crimes has gone down, a poll was taken and â€Å"Nearly 4 out of every 10 homosexuals polled said they fear that anti-gay violence will be directed against them personally, and 32 percent said they've been physically attacked because they are homosexual.† (HateWatch.org). On the other hand, being gay goes against the beliefs and values of some Christian churches. As stated in the bible: â€Å"Do you not know that the un righteous will not inherit the kingdom of God? Do not be deceived. Neither fornicators, nor idolaters, nor adulterers, nor homosexuals, nor sodomites, nor thieves, nor covetous, nor drunkards, nor revilers, nor extortioners will inherit the kingdom of God† (Corinthians 6:9-10). Or another passage: â€Å"If a man lies with a male as he lies with a woman, both of them have committed an abomination. They shall surely be put to death. Their blood shall be upon them." (Leviticus 20:13). With gays not backing down and religious people not backing down, this situation will have a difficult time being resolved anytime soon. Secondly there are many issues that do not help the problem at all, thus creating controversy around the situation. The first problem is the issue of gay marriage. All in favor believe that a gay couple should have the right to get marri... ...N. Equality practice : civil unions and the future of gay rights. New York: Routledge, 2002. Gallagher, John. Perfect enemies : the battle between the religious right and the gay Movement. Lanham [Md.]: Madison Books, 2001. Gil, Tony. Personal Interview. 4 Dec. 2002. Harris, Brandon. Personal Interview. 4 Dec. 2002. Kranz, Rachel. Gay Rights. New York: Facts on File, 2000. Minton, Henry L. Departing from deviance : a history of homosexual rights and emancipatory science in America. Chicago: University of Chicago Press, 2002. Nomad. Ex-Gay Nomad. 4 February 2002 < http://members.aol.com/exgaynomad>. Richards, David A. J. Identity and the case for gay rights: race, gender, religion as Analogies. Chicago, Illinois: University of Chicago Press, 1999. Silverman, Bryan. Personal Interview. 4 Dec. 2002. Stein, Arlene. The stranger next door : the story of a small community's battle over sex, faith, and civil rights. Boston: Beacon Press, 2001. Thomas, Laurence. Sexual orientation and human rights. Lanham, Md.: Rowman & Littlefield, 1999 Thompson, Andrea. â€Å"Pediatrics Endorse Gay Adoption.† NBC News and News Services <http://www.msnbc.com/news>.

The Glen Ridge Rape :: essays research papers

Bernard Lefkowitz’s Our Guys raises a lot of issues, all of which have been discussed throughout this semester.   Ã‚  Ã‚  Ã‚  Ã‚  Just a few pages into the book, words had already begun to jump out at me, capturing my attention. â€Å"The kids in Newark, black and brown, speaking Spanglish, hoods over their heads, wheeling their stolen cars over to the local chop shop -- they were aliens in America. Strange, forever separate and separated from the American ideal. But these Glen Ridge kids, they were pure gold, every mother’s dream, every father’s pride. They were not only Glen Ridge’s finest, but in their perfection they belonged to all of us. They were Our Guys (page 7).† This is a story about White Privilege, I thought. After reading the next two pages, I changed my mind. â€Å"...I wanted to understand how their status as young athlete celebrities in Glen Ridge influenced their treatment of girls and women, particularly those of their age.....I was especially curious about what license they were permitted as a clique of admired athletes and how that magnified the sense of superiority they felt as individuals (pages 8-9).† Oh! This is a story about jock culture, I thought.   Ã‚  Ã‚  Ã‚  Ã‚  I had only touched the surface. Later on, I realized Our Guys was about jock culture and white privilege...as well as rape cultures and patriarchy, male privilege and compulsory heterosexuality, pornography, accountability and â€Å"blame the victim.† All of these issues were part of this, a real life story, a real rape.   Ã‚  Ã‚  Ã‚  Ã‚  Reading the story of the Glen Ridge Rape, I was able to make observations and draw conclusions that Ridgers who lived inside their glass bubbles weren’t able to make. They didn't realize what type of things they were teaching their children. Morals and values are instilled into a person at a very early age. It can start at birth. Males of Glen Ridge were taught that they had power and were expected to do certain things. â€Å"In their youth sons were permitted and even expected to raise a little hell. ‘There was a boys-will-be-boys attitude that went back to the nineteen fifties’....Boys were supposed to be vigorous, assertive, competitive; they were expected to test the boundaries of behavior within clearly established limits† (page 63). This is what boys learned at such an early age. Many of them grew up in male dominant families. Patriarchy was practiced in many homes. Male influence made it difficult for most of them to establish str ong relationships with or learn to appreciate members of the opposite sex.

Health In your own hands :: essays research papers

In response to the question of what I am most thankful for, I said I am most grateful to god for leaving me with great health. Maintaining good health and preventing illness is not an easy task and requires major responsibility. Health is with the individual when they take that first breath and with them when they take the last. In that sense, it is the individual’s responsibility to maintain good health since they are with it all the time and it plays a crucial part in their well being. Good health is a privilege that can be altered or taken away at any instant. Good health comes with responsibility. Responsibility requires time, knowledge, maturity, and determination. Responsibility is defined as the social force that binds you to your obligations and the courses of action demanded by that force (Princeton University, 2003). Moral questions arise when health and responsibility come together: How much does a person value his or her health? Do they have a desire to live? If the answer to both of these questions is no, then that person creates a greater risk in putting their health in jeopardy. If the answer is yes, then the individual must take advantage of the tools provided to them to sustain good health. The modern world has provided literature, internet sources, gyms, health food stores, and most importantly the men of wisdom; physicians. One concept that is beyond the capacity for any person to understand is that the human body is just an encasement, or compartment for a phenomenon known as the soul. It’s a driving force that recycles itself every time we make a conscious decision to direct an action. The body can be compared to a machine: it contains pumps, filters, electrical currents, receptors, tubes, and many other functions. It needs to be maintained just like a vehicle. And like all vehicles, they need to be taken to be checked up and given maintenance by a mechanic every few thousand miles, or as often as it breaks down. Our mechanic is our doctor. His job is to make sure that our fluid levels are correct, diagnose if necessary, and treat if science allows him to. The only thing that separates us from machines is that the engineering and mechanics of our bodies are not fully understood. This dilemma stirs up many questions on how a doctor can and should perform his work.

Wayne Williams Case Study Essay Essay

On July 28 1979, a woman found two males bodies alongside a road. This later was named the â€Å"Atlanta Child Murders†. Between 1979 and 1981, a total of 20-30 African-Americans disappeared in Atlanta, Georgia. They were mostly murdered by strangulation or asphyxiation. A whopping 29 homicides were proved to be linked to the same killer. Police did not have a huge amount of forensic evidence to track down the killer. They only had the evidence of fibers from the bodies and clothing of the victims. The fibers were unusual ones. Some of the fibers were yellow-green nylon and some had a cross section shape to them. The fibers apparently were used in rugs or carpets. In February 1981, the killer began dumping bodies into the Chattahoochee River. The victims found were completely or almost completely in the nude. Supposedly, the killer was watching media coverage of the killings. That helped him modify his methods to get rid of the fiber evidence on the victim’s bodies. Police then started to watch and search bridges along the river. This is all in an effort to catch the killer possibly doing his methods of dumping a body. Early on the morning of May 22, 1981, a police patrol heard a splash in the river. That caused Police to stop and check out what they heard or saw. They found a station wagon on the James Jackson Parkway Bridge. They found out the driver was 23-year-old Wayne Williams. Wayne Williams was a music promoter. He was questioned by police, but was then allowed to leave after a polygraph test, which came back inconclusive. On May 24 1981, the body of Nathaniel Cater was found from the Chattahoochee River about a mile from James Jackson Parkway Bridge. A single strand of yellowish- green nylon fiber was found on his body. A search warrant for Williams’‛ house was given to police. They found carpet similar to the yellow-green fibers found in the early victims in his house. They had to be conclusive enough to tie Williams to the murders. The police needed to demonstrate that these carpet fibers were not normally found in houses throughout Atlanta. Police found in his home a book detailing how to ‘beat’ polygraph tests. They also found statements from colleagues working in Williams’ studio stating he had been seen covered in scratches around the time of the murders. Chemists at DuPont also the world’s largest producer of fibers helped the FBI. FBI analysts passed the fibers through a device that  stretches fibers giving it optical properties. This allowed the FBI to trace these fibers to a Georgia carpet manufacturer. over a 12 month period from 1970 – 1971 the factory only made 16,397 square yards of carpet of this certain fiber and color which was English Olive. Police did some calculations and found out that the probability of finding a room in the metropolitan area of Atlanta that had carpet in that shade was 1 in 7,792. Wayne Williams was thought to be linked to 28 to 30 killings. Police and prosecutors decided on a plan to focus on just two cases, which were the Nathaniel Cater, and Jimmy Ray Payne cases. Those bodies were semi-nude and where recovered from the Chattahoochee River on April 27, 1981. In the latter case, police had also found a fiber on the shorts of the victim, which were similar to fibers found in Wayne Williams’s station wagon. Chevrolet gave details on the number of pre- 1973 vehicles with this type of carpet in them. Police found out that only 680 out of 2 million registered cars were carpeted with this type if carpet. That meant the odds of the victim encountering this fiber from any other car than Williams’‛ were 1 in 3,828. Even though not all this evidence may be enough to convict someone of murder, consider that the odds of both events happening was 1 in 29,827,776. The fiber evidence was the key to all, which was determined. On 27 February 1982, Williams was found guilty of the murder of two victims. Those victims where a Nathaniel Carter and Jimmy Ray Payne. He was sentenced to two terms of life imprisonment. Even though he was not charged with additional counts of murder, it was suspected that Williams was responsible for more of the Atlanta murders. He remains in prison at the age of 58 to this day.

Engineering codes of ethics, case scenarios, and societies that enforce them Essay

Ethics can be defined as a branch within the wider field of philosophy whose main concern is addressing the issue of morality. Morality as a concept seeks to justify actions as good or bad, right or wrong and whether such actions are justified and virtuous. Ethics in itself is divided into many categories which normally vary to suit the issue at hand. From a general perspective, ethics can be widely grouped into theoretical and practical ethics. The theoretical aspect is concerned with theoretical meanings of moral propositions and the manner in which their truth values can be ascertained. The practical aspect of ethics seeks to address the possibility of achieving moral outcomes in a given situation (Luegenbiehl, 2003). Engineering ethics in this context is part of applied ethics that is skewed towards the examination and the setting of standards concerning the duty of an engineer to the general public, how they should attend to their clients, their duty to their employer, and their obligation towards enhancing and maintaining the moral integrity of the engineering profession. Engineering as a profession is very diverse in terms of the possible branches one can venture into. This diversity make some of the engineering fields share only very limited principles. While most of these disciplines tend to complement each other, these engineers are bound to work in different environments. As such there cannot be a unifying code of ethics for the whole engineering fraternity. Ethical codes in this profession are largely dependent on the exact field of specialization and the jurisdiction of practice. Another factor that comes into play is whether an engineer is providing consultancy service to his clients or the engineer is an employee of a given manufacturing enterprise (Colby & Sullivan, 2008). In most countries, the engineers who attend to their clients are normally referred to as professional engineers and are usually licensed. They abide by codes that ensure professional ethics and to a larger extent governed by a number of statutes. Their counterparts who practice in the manufacturing industry have to abide by certain laws, key among them being whistle blowing and also the law of product liability. Their practice leans more towards business ethics as compared to engineering ethics. Professional engineers are usually in private practice and are always responsible for drafting some of the codes of ethics that govern their profession. Engineers who practice in the industrial sector do not enjoy accreditation by the relevant government agencies. It is an arguable fact that despite the field and sector of practice, these engineers face similar ethical issues. Similar in the sense that they share the same root causes but only change slightly in form depending on the discipline and the sector of practice (Luegenbiehl, 2003). Engineering societies have for a long time drafted their own codes of ethics. These codes of ethics have undergone a series of refinement over time in a bid to make them more viable to overcoming ethical issues. Such codes of ethics usually act as general guidelines since ethical issues are very diverse and as such some of these codes have to be adjusted to suit the situation at hand. In the United Kingdom, a notable example is the ‘Institution of Civil Engineers (ICE)’, which chose to incorporate its ethical codes into the standards of conduct. The code of ethics in engineering basically seeks to ensure the wellbeing of the public, the clients in the case of a professional engineer, the employer for the engineers who practice in the industry, and for the enhancement of the moral integrity of the engineering profession (Colby & Sullivan, 2008). Any engineering profession is susceptible to a number of risks some of which may be detrimental to a wider section of the population. With this risk in mind, the first aim of an engineer is to ensure the safety and health, not only of the general public but also for themselves and their workmates. Engineers are required to subscribe to principles that ensure sustainable development in the course of their undertakings. Since the engineering profession is very diverse, an engineer who may be very competent in his field of specialization may not be able to achieve much in another line of engineering. For most of the engineering societies around the world, there are basic ethical codes that they seem to share in common. A code of ethics in the field of engineering always restricts engineers to stick to their areas of specialization. This is to avoid exposing himself and the general public to the imminent danger. An engineer is required to speak the truth on the technical aspects of a job and maintain a professional relationship with the employer or his client. Conflict of interest is a sure way to compromise and as such should always be avoided by an engineer. An engineer is supposed to safeguard the integrity and the interest of the engineering profession. In as much as an engineer is supposed to advance career wise, they have an obligation of ensuring professional growth for their juniors. According to the law of whistle blowing, an engineer is more obliged to safety than he is to the client or to his employer. This law requires the engineer to report cases where their employers or clients fail to follow their directions and in the process are exposing the public to potential danger. In some instances, some the relevant authorities fail to take action and this may end up in the engineer going public (Luegenbiehl, 2003). The most notable cases of disaster in the field of engineering have been caused by both technical and ethical issues. While some of these accidents have been due to technical aspects and design inadequacies, others have been due to inefficient management culture. Some of the cases that have been established to have an ethical dimension on their occurrence include the Chernobyl disaster, Bhopal disaster, Boston molasses accident, Johnstown Flood, just to mention but a few (Pfatteicher, 2001). Chernobyl disaster was an incident that took place in Ukraine, and it involved the meltdown in a nuclear reactor plant. This accident was to a larger extent blamed on human error. The personnel were blamed for using a limited ‘operational reactivity margin. ’ The disaster caused to the people living within the neighbourhood was immense in gravity and most of the effects were of a long term nature. The mental health of the people was extremely affected; cases of cancer were later reported to be rampant in the area. All these effects came about due to the irradiation of the area by radioactive material. The workers were also affected with more than thirty losing their lives within a span of three months from the time of occurrence of the disaster. An advisory group that was later formed to look into the cause of this disaster blamed the people who were responsible for the design of the power plant. They failed to consider certain pertinent aspects of the design which could have prevented such an occurrence or which could have ensured that the accident did not proceed to reach the level it did. It was realized that in the course of preparation and subsequent testing of turbine generators, it was done without the incorporation of systems that were responsible for technical protection. This was viewed to have been a breach of the safety provisions that were required for the actual technical exercise (Pfatteicher, 2001). Some of the most outstanding organizations that are concerned with engineering ethics include the ‘Institute of Civil Engineers (ICE)’ in the United Kingdom, the ‘Canadian Society for Professional Engineers,’ and the ‘National Society of Professional Engineers (NSPE)’ which have been seen to be championing for the upholding of ethical practices within the engineering field. The reasons for their establishments are to ensure that engineers in private practice, the government and in the manufacturing sector are able to subscribe to a common code of ethics within a given jurisdiction. Such bodies have certain punitive measures to their members in cases where ethics appear to have been sidelined in making decisions. To ensure that engineers adhere to such codes set by these organizations, it is mandatory to be registered with certain bodies within given jurisdictions to practice as an engineer (Haws, 2001). There has been a general drift towards formulating an all encompassing code of ethics for all engineers throughout the world. This has been noted by the fact that the codes formulated by most societies throughout the world appear to be having certain similarities. While this appears to be a very noble idea, some room and allowances will have to be allowed to accommodate the different cultures in the world. It is deemed that developing a set of common ethical codes and supplementing it with additional entries that regard the cultural setting and the exact field of specialization within engineering. The codes should be set out in such a manner that no confusion can be reported within a given jurisdiction (Luegenbiehl, 2003). References: Colby, A. , & Sullivan, W. M. 2008, â€Å"Ethics Teaching in Undergraduate Engineering Education. † Journal of Engineering Education, Vol. 97. Haws, D. R. 2001, â€Å"Ethics Instruction in Engineering Education: a (Mini) Meta-analysis. † Journal of Engineering Education, Vol. 90. Luegenbiehl, H. C. 2003, Themes for an International Code of Engineering Ethics. Retrieved on 9th February 2010, from: . Pfatteicher, S. K. , 2001, â€Å"Teaching Vs. Preaching: Ec2000 and the Engineering Ethics Dilemma. † Journal of Engineering Education, Vol. 90.

Body Image

Today's media has become a huge benefactor for women in society's poor body acceptance. Although advertising aims to convince us to buy things, ads seldom portray people that look like us. The average female fashion model wears in-between a size two or four, while the average American woman wears a size 12 or 14. Although today's media portrays female models as alluring, and desirable by all men; it is also producing a â€Å"picture that is far removed from reality' and is fiercely â€Å"unreal, and unattainable† (452).Images of models in ads are often touched up, in order to disguise minor flaws or make the models appear even skinnier than they really are. These false body image ads, showing bodies that are not ell or representative of the general female population, have far-reaching effects. It might seem that it should be recognizable when an ad shows something not real; but we still tend to trust what is seen in the media and through that, body image can be easily confuse d. The constant barrage of unrealistically skinny women can stir up feelings of inadequacy, anxiety and depression.This is what leads to the development of eating disorders like anorexia and bulimia, in today's young adult population. Even before young woman were influenced by the images of media; they were being influenced tit America's top selling manufactured doll since 1 959, Barbie. The average American girl between the ages of three to 1 1 , grows up surrounded by the Barbie body image. Not every child is influenced by the toys they play with; but young children can be easily influenced, especially by their toys.Toys are designed to allow children to practice for roles they will take on as adults; that's why housekeeping toys, doctor kits, toy pots and pans, and baby dolls were manufactured. Through play, children learn about the world and their place in it. What do Barbie's teach children about the world? They teach children that is it desirable to be extremely thin, and to s trive for an unrealistic body image. Research done by the AND show that 95% of those who have eating disorders are between the ages of 12 and 25.The AND also shows, that the mortality rate associated with anorexia nervous is 12 times higher than the death rate associated with all causes of death for females 15-24 years old. Remember; these young women likely played with Barbie dolls, multiple Barbie's around these young ages. Not only can the media stir up feelings of inadequacy, anxiety, and depression; but so can an unrealistically proportioned doll, that is portraying to adolescence what women should be. Body Image Today's media has become a huge benefactor for women in society's poor body acceptance. Although advertising aims to convince us to buy things, ads seldom portray people that look like us. The average female fashion model wears in-between a size two or four, while the average American woman wears a size 12 or 14. Although today's media portrays female models as alluring, and desirable by all men; it is also producing a â€Å"picture that is far removed from reality' and is fiercely â€Å"unreal, and unattainable† (452).Images of models in ads are often touched up, in order to disguise minor flaws or make the models appear even skinnier than they really are. These false body image ads, showing bodies that are not ell or representative of the general female population, have far-reaching effects. It might seem that it should be recognizable when an ad shows something not real; but we still tend to trust what is seen in the media and through that, body image can be easily confuse d. The constant barrage of unrealistically skinny women can stir up feelings of inadequacy, anxiety and depression.This is what leads to the development of eating disorders like anorexia and bulimia, in today's young adult population. Even before young woman were influenced by the images of media; they were being influenced tit America's top selling manufactured doll since 1 959, Barbie. The average American girl between the ages of three to 1 1 , grows up surrounded by the Barbie body image. Not every child is influenced by the toys they play with; but young children can be easily influenced, especially by their toys.Toys are designed to allow children to practice for roles they will take on as adults; that's why housekeeping toys, doctor kits, toy pots and pans, and baby dolls were manufactured. Through play, children learn about the world and their place in it. What do Barbie's teach children about the world? They teach children that is it desirable to be extremely thin, and to s trive for an unrealistic body image. Research done by the AND show that 95% of those who have eating disorders are between the ages of 12 and 25.The AND also shows, that the mortality rate associated with anorexia nervous is 12 times higher than the death rate associated with all causes of death for females 15-24 years old. Remember; these young women likely played with Barbie dolls, multiple Barbie's around these young ages. Not only can the media stir up feelings of inadequacy, anxiety, and depression; but so can an unrealistically proportioned doll, that is portraying to adolescence what women should be.

Operations Management Synthesis Essay

Product Design The products that will be made out of the given components are corrective lenses for eyeglasses. The product will have the following features: a. Corrects near-sightedness or far-sightedness, whichever may be the case, through varying curvatures of the lenses, for different grades b. May be rectangular or circular in overall shape c. Around 1.5 inches in length, 1 inch in width d. Clear and transparent, not dark Considering that the finished goods (lenses) are very much expensive in relation to the raw materials (marbles), it would be safe to say that much value was added to the raw materials by the process of manufacturing, as a result. Process Design and Layout Given a product with just modules and essentially made from the same base – standard glass lenses, the process could be considered as repetitive-focus. Given the raw materials of only marbles, the illustration above is the process diagram that will be used. In order to clearly explain the diagram, the process involves the following steps: a. Crush marbles b. Melt marbles c. Add chemicals to treat the glass for durability d. Check for proper consistency/ratio of chemicals to glass and impurities e. Transfer defects back to start of production cycle f. Cool the material g. Check for bubbles h. Transfer defects back to start of production cycle i. Roll out the cooling glass j. Shape or cut out into shape (either circular or rectangular) k. Check dimensions (1.5 inches by 1 inch) if correct l. Transfer defects back to start of production cycle m. Curve the lens according to specifications using a curving machine n. Check if curvature specifications are met o. Transfer defects back to start of production cycle p. Final cleaning for any impurities q. Polishing of lenses for a shiny or glossy finish r. Final checking of lenses s. Package the lenses t. Ship the finished goods u. Administer preventive maintenance before next cycle (general cleaning of machines, check for machine irregularities) The layout is done in such a way that in case of defects, the transfer back to the start of the production cycle would be easier. Furthermore, the layout allows for job expansion for the workers due to them handling more than one step in the process. Also, this layout is supposed to minimize the amount of distance from one process to another, as long as these processes follow each other. Quality Management Initially, quality checkpoints are put up right after every crucial process. Meanwhile, the concept of six sigma is also implemented in order to address and eventually minimize them. By using the DMAIC, the following is how defects would be addressed: a. Define defects (For instance, bubbles were found.) b. Measure and collect process data (Identify how many products were defective and how much of the production process was affected.) c. Analyze data (What was the cause of the defect? i.e., inconsistency of chemical-to-glass ratio) d. Improve process (What should be done to prevent it from occurring again? i.e, thoroughly checking for proper consistency/ratio of chemicals to glass and/or hiring experts/more skilled employees) e. Control new process to make sure performance is maintained Location The primary determinant of location would be costs of rent and delivery of raw materials. The factory must be closer to suppliers than customers. If we are to apply clustering, it would also be good to be close to competitors, as it would implicate a technology spill-over. To compare the advantages of the possible different locations and the advantages of each, the center of gravity method is while also determining the most convenient manner of delivering orders. Human Resources The main objective of the human resources department is to make sure that the employees are skilled in glass processing. This is in order to troubleshoot properly and detect any defects in the product itself. Since the process is repetitive-focus, the qualifications of the workers are not as high as the qualifications needed for a process-focus design but still higher than that of the product focus. Salaries would be a bit higher than the minimum wage. Furthermore, the following factors shall be observed: a. The criteria on determining which Individual should be assigned to a station must be based on their skills, talents, and strengths (i.e, hiring field experts for checking for defective products and hiring capable persons for cleaning, packaging, and preparing for shipping). b. Employee empowerment should be considered through incentive systems (i.e, offering incentives to employees based on their needs, for instance, car loan for managers while food/transportation bonuses for the laborers). c. Employee empowerment through job expansion (i.e, enriching/enlarging the scope of the jobs, for instance, 1-2 employees assigned for all checkpoints instead of having 1 per checkpoint). Supply Chain Management .The primary suppliers should easily be accessible since raw material orders will only be issued upon demand. There must be a strong relationship that would be built with primary suppliers in order to eventually avail of discounts and a higher assurance of good quality. There should always be backup suppliers in case the main supplier fails to deliver. Other suppliers would include actual glass manufacturers in case of the lack of materials from primary sources. Inventory Management In order to maximize resources and keep inventory holding costs at a minimum, we will employ the Just-In-Time method for managing inventory. Furthermore, we will order only when we need to produce; thereby not falling into the trap of availing of quantity discounts which sometimes incur more expenses in the long run. As a result, to further reduce inventory costs, finished goods could be shipped out of the plant as soon as possible. Scheduling All orders will be taken and processed in a uniform manner. Orders may be changed in specifications only until the preliminary process of producing the modular standard glass lens is concluded, meaning that once the process of curving the lenses, which is the process where the orders differ, the orders cannot be changed anymore. Regularly, orders will be processed and queued regularly, preferably every day, Maintenance Preventive maintenance is done every after cycle, which involves the standard operating procedure of cleaning the machines. When factory is not scheduled for production, a more general preventive maintenance is undertaken to ensure smooth operations during the scheduled productions by increasing the reliability of the machines.